Stock Number: EQU005204
Make: Genie
Model: GTH844
Year: 2011


Stock Number: 2-16-261627
Make: Potain
Model: IGO50
Year: 2006


Stock Number: 208381
Make: CAT
Model: GC55K
Year: 2015


Stock Number: 207627
Make: Manitou
Model: MHT10225
Year: 2013


Stock Number: 1-16-600209
Make: Terex-Comedil
Model: CTT182-8 TS21
Year: 2016


Stock Number: EQU005197
Make: Genie
Model: GTH1056
Year: 2011


Stock Number: 232199
Make: WackerNeuson
Model: WK HI400HD D
Year: 2013


Stock Number: EQU007559
Make: Genie
Model: Z60/34
Year: 2010


Stock Number: 2-16-230342
Make: Terex-Comedil
Model: CTT181/B-8 TS21
Year: 2007


Stock Number: 208903
Make: CAT
Model: GP25N5
Year: 2015


Stock Number: 232127
Make: WackerNeuson
Model: WK HI400HD D
Year: 2013


Stock Number: 232323
Make: Magnum
Model: MMG35
Year: 2013


 
Doosan Gas Forklifts

Doosan Gas Forklifts

The turning radius on a forklift is also known as the turning circle. This piece of information is essential for a machine operator to have. It gives the driver the knowledge of how much space is needed to turn the lift truck around. For example, a tighter turning radius allows the equipment to successfully work in crowded areas and restricted places, therefore enhancing the lift truck's maneuverability. Drivers who do not know this measurement can cause damage to the property or to the equipment.

Before testing the turning radius, check the steering geometry alignment and correct it if it requires adjustment. Begin the test with having the trained operator inside the cab to control the machine's functions. A second individual on the ground utilizes a spray bottle or a hose to wet the inside and outside of the model's wheels. After that, drive the machine in a complete circle with the wheels turned to the maximum angle. Repeat the process once and if necessary, continue to wet the wheels.

Measure the watermarks left by the tires using a tape measure after your measurement test has been done. The watermark test begins from the tire mark's midpoint to a similar point across the diameter of the circle. For the outside turning diameter, measure the watermark left by the exterior tires from the circle's one side to the opposite side of the circle. The inside turning diameter can be established by stretching the tape measure across the circle left by the inner tires. Next, divide these numbers in 2 to be able to establish the turning radius. Be sure to note that the turning center is the midpoint of the diameter of the circle.

To be able to establish the wall-to-wall turning diameter, drop a plumb line from the extreme outside radial extension on the equipment. After this is done, the next step is to find the point on the pavement directly below. This point to the turning center indicates the clearance radius of the machine. As a rule, wall-to-wall turning diameter is two times the clearance radius of the machinery.

  • Taylor Lifts
    No matter what type of company or industry you are a part of, it would be necessary to have a forklift if you have components or ... More
  • Hyster Counterbalance Forklift
    The Hyster Company always strives to improve its products and provide drivers with improved comfort, productivity and excellent ... More
  • Jungheinrich LP Forklift
    Lift trucks are essential pieces of equipment utilized commonly in business, especially in distribution centers, warehouses, storage ... More
  • JLG Boom Lifts
    The boom lifts engineered by JLG could get you into position efficiently, quickly and safely for maximum production. Excellent ... More
  • Genie Electric Boom Lifts
    Genie aerial work platforms are versatile, user-friendly, effective equipment that are a economical solution for numerous business ... More