Compared to a sit-down model, the stand-up lift truck unit is really different to utilize. The way at which you lift cargo and your movements are really different. If you do not have correct training for using a stand-up unit, you could probably cause harm to yourself or to co-workers. When using a stand-up unit, you need to follow the correct safety rules. There are a few basic operating standards that have to be met when operating a stand-up unit.
When starting, stand up on the forklift so as to get a feel for the controls and the steering knob. The steering is handled with the knob steering plate instead of a steering wheel. Remember that this specific knob moves really fast, therefore, you should get used to moving it gently so as to be certain not to over steer. The horn is located on the control handle, as is the control for the fork movement and for backwards, forwards. The floor pedal allows the machinery to move.
Turn the key to start the equipment's engine if you are set to begin. The forks must be retracted at this stage. If you are moving around the floor, the forks must be pointed slightly upwards. Never drive with extended forks. If you are moving forward, move the control handle forward and step on the pedal in order to make the lift move forward. If you are backing up, be certain to beep your horn so as to alert individuals around you. Look behind you prior to stepping on the pedal in order to make sure the way is clear and safe. After that, while stepping on the pedal, pull the control handle towards you. Always stay alert and focused and make sure that you are always operating in a safe manner.
When approaching a corner with the lift truck, turn the steering knob towards the direction you are heading. Make sure to keep your foot on the accelerator and keep your hands on the control handle. When turning right, the steering knob will move in a clockwise direction during forward travel. If you are turning left, your steering knob will go in a counter-clockwise direction.
If you have just used sit down units, the stand-up versions could take some getting used to. With some training and taking some time to know the equipment, you can handle loads quickly and efficiently in little time.